MT100 is an efficient and economical GSM remote control based on a bulb-type socket, with easy installation and use in any type of pump station panel. It is installed inside the existing panel that drives the pump motor, regardless of the type of panel, starting method, panel power, etc.
It takes up minimal space as it consists of a single 11-pin plug-in unit. The remote control of the pump through the MT100 is done by the inexpensive, safe and simple way of recognizing missed calls by each pre-registered operator, i.e. recognizing their call number.
- Designed for irrigation pumping stations. Utilizes missed calls (toll free) and can send pump start/stop confirmation.
- It can replace previous types of VHF (PT611) and GSM (MT811) remote control devices without changes to wiring.
- (MT100U) In case of power failure, it notifies all registered recipients by SMS.
- It is available in two types, for connection to the manual (MT100A1) or automatic (MT100A2) mode.
- It is attached to an 11ft lamp-type base and is powered directly from the 230VAC low voltage mains.
- It requires minimal wiring and no programming, other than entering the phone numbers (one to four) that will operate the device.
- It has an option to program watering time up to 10 hours.
- It is easily removed from its position so that it can be removed for the entire time that the pumping station is out of operation, for protection reasons.
- The functions are stored in the device and are not affected in case of a possible change of number (SIM).
- It was designed and manufactured entirely in Greece and includes complete wiring and usage instructions in Greek and English.
- It has a 2-year warranty and lifetime technical support.
